Site power for quarry equipment
Diesel generators for quarry sites without a reliable grid supply, sized to the actual starting and running load of the equipment rather than to a nameplate figure.
Motor starting draws several times running current. A generator sized only on running load will trip or stall on start-up — especially with wire saw machines, which start against load.
Wire saw drives and control electronics are sensitive to voltage sag. A generator with inadequate reserve shortens the life of the equipment it is powering.
Send us the equipment you need to run and we size the generator around the real combined starting and running demand.
Values we can state from real applications, with the basis for each one.
Every specification above is confirmed against your material, machine and site conditions before an order is placed.
We specify against the job rather than the catalog. These are the facts that decide the answer for anything in Quarry Equipment.
This product is specified as part of a set. These are the wire families and product groups it is normally combined with — final selection depends on the material, the machine and the site conditions.
Actual applications with the equipment, tooling and working conditions recorded.
Cutting speed 8–10 m²/hour. Wire lifetime 20–24 m² per meter. Stable cutting with no wire breaks recorded, and measurably reduced downtime.
All 18 wire saw machines still in service, including the original unit. A partnership that has run from the early Keentool days through to the current
Higher output per shift, with wire life stable enough to plan production around rather than react to.
How this equipment and tooling performs in real quarry and construction conditions.
Send the material, the machine and the working conditions. We will come back with a specification that suits the job — and say plainly where a limit exists.
